ofbas.blogg.se - How to flash with odin to unlock bootloaders

How to flash with odin to unlock bootloaders how to#
How to flash with odin to unlock bootloaders zip file#

If there are any additions you’d like to be added to this guide, let us know in comments below.

Your phone will automatically reboot when Odin is done flashing.

Once it has finished successfully, you’ll see a pass message on the Odin screen.

Click the Start button on Odin and wait for it to finish the process.

└ Note: DON’T play with any other options on the screen. You’re only required to connect your Samsung device and select the FIRMWARE file in PA tab. tar.md5 FIRMWARE file that you downloaded.

Click on the AP tab on Odin window and select the.

zip firmware file you have downloaded to get the Odin flashable. The Odin window on PC should detect the phone and show an “Added!!” message.

Once your device is in download mode, connect it to the PC with a USB cable.

Press Volume Up on the warning screen to accept it and boot into Download mode.

Press and hold “Home + Power + Volume down” buttons for a few seconds until you see a warning screen.Boot your Samsung device into Download mode:.Under Developer options, look for “Enable OEM unlock” checkbox/toggle and make sure you Check it or turn it ON.Go back to the main Settings screen, scroll to bottom and select “Developer options” from there.Go to Settings » About phone » and tap “Build number” seven times to enable “Developer options”.Click on the 'CP' button, choose the CP file inside your extracted. Next, click on the 'AP' button in Odin and choose the AP file inside your extracted firmware folder.

How to flash with odin to unlock bootloaders zip file#

zip file and run/open Odin3 v3.10.7.exe file from the extracted files on your PC. Click on the 'BL' button, then choose the file that starts with 'BL' inside your extracted firmware folder.

How to flash with odin to unlock bootloaders how to#

Update : Check out our new guide on this ‘ How to Install stock firmware on Samsung Galaxy device‘ here.įlashing a firmware using Odin is pretty easy, but you’ve to be very cautious with the options you chose on the Odin screen and the files you flash. Any carelessness might lead to a bricked device. If you’re flashing a firmware using Odin for the first time, we’d recommend you to not rush and follow each and every step very carefully.